Calling up the Program

To run Integrade, you must go to the DOS prompt.
From there, Type "cd integrd" and press Enter
like below:

run1.jpg (2006 bytes)

Type "igpro" like below and press Enter

run2.jpg (1973 bytes)

You should see the following screen:

run3.jpg (28476 bytes)

Use Alt and F to access the file menu.
If you already have a gradebook (you already imported) you can open it
If you have not run the import procedure, create a new gradebook using the Import Classes section


copyright 1998 Christopher I. Cobitz